Swann SW242-D8U, User Manual

Page: 10 / 59

7
8) “ ZOOM ” :
Press “ZOOM” button to enlarge the picture of the selected channel (2X digital
zoom).
9) “ ” / “
－
” :
Press “ “ button to show the 4 channel display mode.
Press “
－
” button to change the setting in the menu.
10) “ SEQ ” / “
＋
” :
Press “SEQ” button to activate the call monitor function and press “SEQ” button
again to escape the call monitor mode.
Press “
＋
” button to change the setting in the menu.
11) “ POWER ” :
Press this button to turn on / turn off the DVR.
(Under the recording mode, please stop recording before turning off the DVR).
12) “ CH1 ” “ CH2 ” “ CH3 ” “ CH4 ” :
Press the button “ 1 ”, “ 2 ”, “ 3 ” or “ 4 ” to select the desired channel.
13) “ REC ” :
Press “REC” button to activate the manual recording.
14) “ PLAY ” :
Press “PLAY” button to playback the recorded files.
15) “
UP / PAUSE , DOWN / STOP , LEFT / FAST REWIND , RIGHT / FAST FORWARD
“ :
Press “
▲▼
◄►
“ to move the cursor up / down / left / right.
Under the playback mode, press “ “ button to pause playback.
Under the playback mode, press “ “ button to stop playback.
Under the playback mode, press “ “ button to fast rewind.
Under the playback mode, press “ “ button to fast forward.
16) “ ” :
Press these two buttons to select live or playback sounds of the 4 audio channels.
17) “ ” :
Press these two buttons at the same time to enter / exit the PTZ control mode.
18) “
◄
” or “
►
” + “POWER”
Press and hold “
◄
” or “
►
”, and press “POWER” to switch to NTSC or PAL system.
Please see “5.4 SWITCHING THE N/P SYSTEM” at P.30.