4 | SmithsEP.co.uk | Issue 003 - January 2021
6. Electrical connection
IMPORTANT: Connection to the power supply must be effected by means of a fixed
power cable which is fitted with a plug-type connection or a two pole isolating switch
with a minimum contact opening of 3 mm.
Electrical connection must be carried out by a qualified electrician and in
accordance with local regulations and both data on the name-plate and the
appropriate diagram inside the terminal box cover.
Follow all safety standards.
7. Connect the appliance only to a mains supply protected by a Residual Current Device
(RCD or Ground-Fault Circuit-Interrupter) with a rated residual operating current not
exceeding 30mA.
8. Prior to any modification being made to the equipment, it must be agreed with and
authorised by the manufacturer. Original spare parts and accessories authorised by the
manufacturer are integral part contributing to the safety of the equipment and of the
machines. The use of non original components or accessories may endanger the safety
and causes the termination of the warranty. Safe operation is only assured for the
applications and conditions described in Application of this manual.
Non-observance of the safety instructions results in the loss of any claims to damages.
The indicated limit values are binding and cannot be exceeded for any reason whatsoever.
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Important safety and installation instructions
Prior to installation, read these installation and operating instructions. The installation and operation should
also be in accordance with national regulations and accepted codes of good practice.
Application
This heater appliance is intended for use as a down draught air heater and can be mounted directly onto
the ceiling or fitted into a 600 mm x 600 mm suspended ceiling tile frame. It is to be mounted with the
underside between 2.5 and 3.0 metres from floor level. If exceeding 3 metres there will be a reduction in
performance.
This heater appliance must not be used in bathrooms or similar high humidity areas.
Product Complies with LOT20.
Please note:
The guarantee may be invalidated if this product is not installed and used in accordance with this guide.
This heater will NOT function without the wall mounted wireless controller (supplied). The controller can
control an unlimited number of heaters.
