background image

2  |  SmithsEP.co.uk  |  Issue 003 - January 2021

Introduction

The following items are included in the carton:

•  Product complete with grille
•  Grille fixing screws (9)
•  Wireless wall controller

Note: This heater must be used with the  
SLVT B wireless controller (supplied) It will not 
work without it. 

In the event of any items missing or visible  
damage, please contact us on  
+44 (0) 1245 324560.

Please leave this Installation and User Manual with 
the owner of the property.

Contents

Introduction 2 
Declaration of conformity 

Symbols used in this guide 

3

Important safety and installation instructions  3/4
Application 4
Product Information 

5

Installation 5
Electrical connections 

8

Grille fixing 

9

Fault finding 

9

User Manual
Important safety guidance 

12

Introduction 13
Operation 13
Wall controller operation 

14

Fault finding 

16

Registering your product 

17 

Disposal 17
After sales and spares 

17

Declaration of conformity

EC Declaration of conformity
We, Smith’s Environmental Products Limited  
1-2 Blackall Industrial Estate 
South Woodham Ferrers 
Chelmsford 
Essex CM3 5UW 
Tel: 01245 324900 Fax: 01245 324422

Declare under sole responsibility that the products:

Product name:  

Skyline

Product range:  

CT4E

Listed above confirms with the following European 
Union directives: 

Low Voltage Directive 2006/95/EC 
Safety Directive 98/37/EC 
EMC Directive (89/336/EEC) 
Machinery (98/37/EC)

Standards comply with the above directives.

Safety Directive Standards: 

EN 60335-2-80:2003 + A1:04 in conjunction 
with EN 60335-1:2002 + A11:04 + A12:06 + 
A2:06 
With UK deviations

This Declaration is made on behalf of Smith’s 
Environmental Products Limited

Summary of Contents for Smiths Caspian Skyline E





















Reviews: