Swann DIGITAL VIDEO RECORDER Manual Download Page 5

Page: 5 / 60

English

Connec

ting the D

Front Panel of the DVR

1) USB 2.0 Port:

For connecting the USB mouse, USB external

storage to the DVR for backup, or for applying new firmware.

2) Play/Pause:

Opens the playback interface from the live

viewing mode. Pauses playback or resumes playback from

paused.

3) Display:

Enters split-screen view, where the screen shows

one or four (

2 x 2

) video feeds at once.

4) Menu/ESC:

Opens the DVR’s menu, or goes back one step

from a submenu.

5) Select:

As the name suggests, it selects an option or item

from a menu.

6) D-pad:

For navigating around menus when you’re not using

the mouse.

(Why aren’t you using the mouse? It’s awesome.)

7) Power LED:

Will be lit whenever the DVR is supplied power

and turned on.

8) HDD LED:

Will flash whenever the DVR is writing to/reading

from the installed hard drive.

Installation Guidelines

• Do not expose the DVR to moisture.

Water is

the arch-enemy of electrical components and

also poses a high risk of electric shock.

• Avoid dusty locations.

Dust has a tendency to

build up inside the DVR case, leading to a high

risk of failure or even fire.

• Only install the DVR in a well ventilated

space.

Like all electronics,

the circuitry and hard

drive in the DVR produce heat, and this heat

needs a way out.

• Do not open the DVR case except to install/

swap the hard drive inside.

There are no user

serviceable parts inside.

• Never open the case whilst the DVR is

plugged in

, and never turn the DVR on whilst

the case is open.

• Use only the supplied power adapter.

Other

adapters may cause damage to the DVR or

cause a fire.

• Do not cut or modify any cable for any reason.

Doing so will void your warranty, as well as pose

a great risk of fire or electrical shock.

• Do not expose the DVR to sudden bumps or

shocks

(for example, being dropped). The DVR

is as robust as possible, but many of the internal

components are quite fragile.

• Remember that the DVR is, in all likelihood,

going to be left on

24 hours a day, 7 days

a week

. Keep this in mind when choosing a

location for installation.

Summary of Contents for DIGITAL VIDEO RECORDER





























































Search results

Summary of Contents for DIGITAL VIDEO RECORDER

Reviews:

Related manuals for DIGITAL VIDEO RECORDER

Brands by name

Popular brands

Swann DIGITAL VIDEO RECORDER, Manual

Search results

Summary of Contents for DIGITAL VIDEO RECORDER

Reviews:

Related manuals for DIGITAL VIDEO RECORDER

Brands by name

Popular brands