Swann Ceramic Series, Manual

Page: 6 / 13

6
1. Check if the rating indicated in the rating plate
corresponding to the main voltage in your home
2. Press handle buttons to lay handle down. Fig.1
(Note: When handle is up, the unit is shut off, it
will be ON when handle is laid down.)
3. Remove any protective foil or sticker or card from
the soleplate.
4. Fully unwind and straighten the power cord and
the supply hose.
5. Place the appliance on a stable, level and horizontal surface such as ironing board.
6. Place the iron onto the iron rest plate horizontally at the base unit.
Prepare the appliance for use:
1. Press the water tank lock upwards and
slide the detachable water tank
outwards from the base.(Once power
on, water tank indicator light
will turn off while water tank is sliding
out.) Fig.2
2. Take the filter upwards out from the
water fill hole. (You can take the filter
out of the opening for filling water into
water tank, or fill water into water tank
directly with the filter existing in the
opening) Fig.3
3. Fill the water tank up to or below the
“MAX” fill line with clean water. Fig.4
4. Replace filter back into water filling hole.
5. Replace the water tank into the base
unit again. It will be locked in place with
the base unit when a “click” sound is
heard.(Water tank
indicator light will light up to indicate that
water tank and filter have been installed
in place. Power will then be ON) Fig.5
6. Always pour out the remaining water
after use.
Fill water tank
How to use your steam generator
Fig.1
Fig.2
Fig.3 Fig.4
Fig.5