www.swagelok.com
AHSU with base
Air-Actuated Hydraulic Swaging
Unit (AHSU)
Setup and Operating Instructions
READ AND UNDERSTAND THESE INSTRUCTIONS BEFORE USING THE AHSU.
Definitions
Statements and symbols are used in this document to identify safety concerns. Read the definitions below
before setting up and operating the AHSU.
•
CAUTION!
Statements that identify conditions or
practices that could result in damage to the
equipment or other property.
•
WARNING!
Statements that identify conditions or
practices that could result in personal injury
or loss of life.
•
WARNING!
EYE PROTECTION
Safety glasses must be worn when setting
up and operating the AHSU.
•
CAUTION!
Do not tamper with or alter any
components of the AHSU.
•
CAUTION!
Limit air inlet pressure to less than 90 psig
(6.2 bar). If the inlet pressure exceeds 90
psig, a pressure relief valve in the unit will
activate
Safety Precautions
•
CAUTION!
Do not operate AHSU unless all tooling is
installed and the tubing, nut and ferrules
are properly positioned within tooling.
•
CAUTION!
Return the AHSU to your independent
Swagelok sales and service representative
if any signs of hydraulic fluid leakage or
malfunction occur.