SW-Stahl 24529L, Operating Instructions Manual

Page: 8 / 8

SW-Stahl GmbH Tel. +49 (0) 2191 / 46438-0
An der Hasenjagd 3 Fax +49 (0) 2191 / 46438-40
D-42897 Remscheid E-Mail: info@swstahl.de
24529L
www.swstahl.de
BED
IENUN
GS
AN
LEI
TUNG /
INSTRUC
TI
ON MANU
AL
DIN flaring
 Screw in the DIN crimping adapter up to the limit stop and then remove it.
 Completely loosen both clamping screws and remove the line from the clamping
pieces.
SAE flaring
 Pay attention to the arrow attached to the flaring adapter.
 Screw in the SAE flaring adapter, first in the direction of the arrow up to the limit
stop and then remove it.
 Turn the adapter in opposite to the direction of the arrow into the clamping piece
up to the limit stop.
 Completely loosen both clamping screws and remove the line from the clamping
pieces.