SVS-Vistek SHR 10GigE, Manual

Page: 63 / 103

5.2.8 Read-out control
Read-out control defines a delay between exposure and data transfer. Read-out
control is used to program a delay value (time) for the readout from the sensor.
With more than one camera connected to a single computer, image acquisition
and rendering can cause conflicts for data transfer, on CPU or bus system.
Fig.: 5-27: Illustration of physical data stream in time
5.2.9 Temperature sensor
A temperature sensor is installed on the main board of the camera. To avoid over-
heating, the temperature is constantly monitored and read. Besides software mon-
itoring, the camera indicates high temperature by a red flashing LED (see flashing
LED codes).
5.2.10 System clock frequency
Default system clock frequency in almost every SVCam is set to 66.6 MHz. To
validate your system frequency refer to: specifications.
Using the system clock as reference of time, time settings can only be made in
steps. In this example, the transfer rate is 66.7 MHz, thus resulting in steps of
15 ns.
INFO Use multiples of 15 ns to write durations into camera memory.
5 Feature description 63