SVS-Vistek SHR 10GigE, Manual

Page: 24 / 103

4.3 10GigE limitations and issues
10GigE is a high performance network protocol. Make sure your computer per-
formance is sufficient to digest the amount of data in terms of software and in
terms of hardware components, especially the combination of motherboard and
NIC.
4.3.1 Compatibility to nBase-T
Our 10GigE cameras supports 1GigE, 2.5 GigE and 5 GigE
(nBase-T), upgradeable with firmware update. At the moment of
writing, only some models with latest firmware support nBase-T
and 1GigE. The FXO series will be the first one to provide this fea-
ture.
4.3.2 Bandwidth limitation
With certain computer motherboards / 10 GigE NIC combinations, a reliable data
connection might not be possible. Frame drops are the result.
To get rid of these frame drops, the 10GigE interface of the camera does have an
adjustable bandwidth limit. Reducing the bandwidth will reduce your maximum
framerate, obvoiusly. It might be not sufficient to reproduce stable bandwidth,
though.
A solution might be a different motherboard / NIC combination together with the
latest software and firmware update of your NIC and motherboard manufacturer.
Latest firmware versions improve data stability.
Special NICs support 100% connections without frame drops.
4.3.3 Recommended setup
It is recommended to use a 10GigE Ethernet card with grabber capabilities. All
SVS-Vistek certification setups are using this kind of cards.
Contact sales@svs-vistek.com for details and more recommendations.
l
Use high performance PC (such as Intel Core i5 or Core i7 with 16 GB, and
mainboard with PCIe Gen 3)
l
Use direct NIC-to-camera connections, no switches.
l
Reliable 10 GigE connections are reported with Myircom
MYR-10G-PCIE2-8C2-2T+MVA Dual LAN port and
MYR-10G-PCIE2-8C-T+MVA single LAN port with installed MVA license
4 Connectors 24