70
HDE-70
H.264 – 4:2:2 – 10 bits Decoder
MANUAL V6.9
Chapter 5: Web Server
5.1
Introduction
This equipment can be controlled by use of a PC connected at the rear panel
Ethernet connector
.
To enable the browser interface correctly the IP address, Subnet Mask,
Gateway, Admin Password and User Password need to be set correctly on
this unit. Next, the steps so as to setup network parameters are shown:
1.
Go to Unit -> Webserver & SNMP
Figure 5.1 Web Server screen
2.
Select Locl option and set an IP address. So as to change the IP
address first press the OK button and then, with the Up, Down keys
select the desired number. So as to change from one character to
another, press Right, Left keys. Press the OK button so as to save the
introduced value.
Figure 5.2 Local IP
04 Output
05 Unit
Unit
Monitor
Unit
Webserver & SNMP
Locl: 192.168.001.191
Mask: 255.255.000.000
