8
HDE-70
H.264 – 4:2:2 – 10 bits Decoder
MANUAL V6.9
Chapter 3: Decoder Operation and Menus
This section contains all the necessary information to operate, control and
configure the HDE-70 decoder.
3.1
Display and LEDs
To turn the equipment on and off, press the On/Off button. When the
equipment is turned on, the display will show the start-up message (model
of the equipment), and then it will display the main screen where there are
displayed the most important parameters of the received signal.
Next, there are shown the linkages between the input and the character
displayed in the principal screen:
Audio
A
Data
DATA
D
GPS
G
Table 3.1 Linkages between the input and the character displayed
Next, the main screen for each input type (ASI or IP) is shown:
