61
HDE-70
H.264 – 4:2:2 – 10 bits Decoder
MANUAL V6.9
3.7.2.6.7
Unit Firmware Screen
In this option, the firmware of the device can be updated with a USB device.
The steps to update the device are explained below.
This field shows three options:
Current Version
Update Firmware
Restore Default
Figure 3.60 Encoder Menu
Line nº
Function
1
Current Version:
In this field the number of the version installed in the device is
shown. The characters which describe the number of the version are
the one inside the red box shown in the figure above. The rest of the
characters are important for the manufacturer but are not important
for the user.
2
Update Firmware:
This field is the one for updating the version of the device. So as to
update the equipment properly, follow the instructions below.
3
Restore Default:
In this option, the equipment is restored to the first factory version.
So as to restore the equipment to the initial set up, press OK button.
Table 3.19 Unit Rev menu options
Current Version: V6_35251042919-19
Update Firmware:
Restore Default:
Number of the version of the device
