SVP HDE-70, Manual

Page: 18 / 124

11
HDE-70 H.264 – 4:2:2 – 10 bits Decoder
MANUAL V6.9
3.2 Decoding Example
Next, a reception example and the image that appears in the monitor
screen are shown.
Example (IP)
Setup:

Received signal type (IP)

Bitrate: 8 Mbps

Audio/Video codification: MPEG2

Input video signal format: 576/50i

Decoder profile: 4:2:0

Delay: Low delay

Audio status: Audio1 analogue (enabled), Audio2 AES/EBU (disabled)

Data status: GPS

Number of services: 6 services

Name of the selected program: PROGRAM 001
Figure 3.3 HDE-70 Monitor screen. Example
The audio 2 status indicator is darkened because it is only receiving one
audio signal. If two audio signals are received, then this field will not be
darkened.
The data status field indicates with a darkened character that no data is
being received. If the ‘G’ character appears and it is not blinking, it means
that the GPS in the transmitter is connected to the satellites.
If before the audio status a padlock appears, it means that the received
signal is encrypted.
IP: 8.0Mb MPEG2 576/50i 420/L A
A
G
(06 services) PROGRAM 001
darkened
blinking
padlock