SVERO 1 SA, User Instructions

Page: 2 / 48

2
SVERO Electric Winch -1 SA
Read through these user instructions before using the winch. Improper operation may
lead to hazardous situations! These winches are intended solely for pulling. They are
delivered complete with wire rope and load hook and must be securely fixed to a stable
construction. Winches for 200 and 300 kg are single phase for plug connection to an
earthed single phase 230 V 50 Hz socket outlet. The winches for 500, 750 and 1000 kg
are only available in three-phase construction for 400 V 50 Hz and also have a plug, an
IEC 60309 connector, with an integral function allowing easy swapping of two phases.
Safety rules
•
Check the winch and its function before use. The rope must be correctly wound
onto the drum. See Fig 3.
•
Never exceed the maximum load.
•
Attach the load with its load hook correctly to fixing eye, shackle or other working
point on the load. Never use the wire rope from the winch as a sling round a load.
•
The winch must not be used for transporting persons.
•
Make sure everyone keeps a safe distance from the load or wire rope.
•
Protect the winch from rain etc.
•
Ambient temperature -10
°
C – +40
°
C.
•
Do not pull on the control or connection cable. Handle the winch with care.
Technical data single-phase winch
Model
1 SA 200 1 SA 300
Maximum load (pulling capacity) daN (kg)
200 300
Rope diameter mm
6 7
Rope construction 7x19 7x19
Rope length, total m
30 30
Rope length, max. uncoiled length m
29 29
Rope speed m/min
10 – 15 10 – 15
Motor output kW
0.8 1.5
Voltage V single phase
230
single phase 230
Rated current A
9 10
Fuse, time-delay A
10 10
Protection form IP 65 IP 65
Weight incl. rope and load hook approx. kg
38 50