(26)
24 mm
- The electrical cartridge is fitted into the base of the heated towel rail - either to the
left or right hand side.
- In order to minimize the risk for leakage Svedbergs recommends to use a thread tape or
similar product to prevent leakage.
NOTE! The electric element is only designed for installation in the lower conections!
1
2
3
GB
Important information
- Use only adapted key no. 24 when tightening (pic. 1).
NOTE! Do not install the electrical heater while the control
panel and the heating element are attached to each other.
- Switch on the electrics directly after assembly and filling.
- The electrical heater will immediately get damaged if you connect the heater to
electricity without having the radiator filled with water or if the water level is to low.
- If the electric element is connected without water, this will damage the thermal fuse.
The right to reclamation is not valid in these cases. See picture 3.
- For a fixed installation, contact a certified electrician.
