Monitoring Station SV 279 PRO
14
Note: See also SVAN 979 user manual.
SVAN 979, when it works with the monitoring
station, is powered from an external power
supply via the
6-24V
socket.
Data transfer to the modem is via a
USB Host
socket, the serial interface working with speeds
up to 2 Mbit/s.
Other instrument sockets are not used in the
SV 279 PRO system.
not used
serial port
external power
Note: For safety reasons, it is recommended to remove the internal batteries
from the instrument when it is inside of the monitoring station case.
To extract the batteries
the user should switch
off
the
instrument,
unscrew the bolt, take
off the black bottom
cover of the instrument
and slide the battery
tubes out.
The user should then fix the bottom cover back on.
SVAN 979 is delivered with 8GB micro SD-card.
The user may exchange it for a 32GB card, but before insertion the card must be
formatted as FAT32.
The micro-SD Memory Card is in the slot under
the bottom cover and can be accessed after the
bottom cover is removed.
To extract the card from the card-slot, the user
should push on the card and then pull it out of the
slot.
There are three important settings, which should be assured in the instrument as a part
of the monitoring station:
