SV 104A USER'S MANUAL_______________________________________________________
57
6.5.2
Profile settings tab
The main settings where specific acoustic profile configuration can be set are
located under “Dosimeter”
tab. There are already predefined pre-sets in each profile column. By choosing predefined configuration some
obvious fields will be automatically greyed. Others must be setup by the user.
There are three additional user-defined pre-sets, whose name can be changed during configuration with
use of the little icon (notes with a pen) which is then enabled.
Apart from alarm
DOSE
threshold there are three additional source of warning alarm, which can be set.
See figure below.
Figure 6-8
Dosimeter settings - profile configuration tab
Note: Note, that some profiles can be disabled to be seen later during measurement run (see
chapter 6.5.5)
change user
defined preset
name
change additional
source of alarm
