SV 104A USER'S MANUAL_______________________________________________________
40
4.13
Mounting and positioning the SV 104A
Unless specified by local legislation, personal noise dosimeters should always be mounted on
the shoulder, circa 10 cm from the most exposed ear, with the microphone approximately a few cm above the
shoulder.
SV 104A
shape and microphone height ensures proper instrument position. see Figure 4-20 below.
Figure 4-20
SV 104A positioning
4.14
Reviewing measurements
Most of the parameters can be inspected in real-time during either measurement run or stopped mode
of operation. If the display screen is turned off just press any key (but watch notice below).
The keys on the keypad of the instrument enable you to navigate thru most of the parameters.
For specific information on the VIEW modes, please see chapter 3.9.
•
Use the
<SCROLL>
key to move down the list through the various measurements
•
Use the
<PROFILE>
key to change the ACOUSTIC PROFILE you would like to inspect
•
Use the
<ENTER>
key to change the VIEW mode
Note: In most cases the keypad will be probably locked. To gain access to the results and
unlock the keypad see chapter 4.12.
Note: After reviewing results remember to lock the keypad again in order to maintain
the integrity of the measurement run by preventing uncontrolled access to the instrument.
