SV 104A USER'S MANUAL_______________________________________________________
39
4.11
Auto-run mode information
Note, that when auto-run mode (timer and/or pause) is configured, there is information on the screen
available for the user. There is no need to turn on the instrument manually. All the timer procedures can be
easily pre-programmed with the use of the
Supervisor
software.
Figure 4-18
Auto-run mode
– timer and programmable pause screen
4.12
Security lock
Please consider locking the keypad and display during the measurement to prevent the wearer
or anybody else from tampering with the measurement run. The
SV 104A
can be set up to automatically go
into locked mode when it starts (see chapter 6.5.7.3). That automatically prevents any tampering, but
the unit can still be unlocked if necessary with proper sequence of key presses.
Locking SV 104A unit
: To lock the instrument the operator should hold the
<SCROLL>
key for
a
couple of seconds during which a countdown (“Keyboard lock” 3… 2… 1… ) is displayed and the unit
gives
you time to decide if you really want to activate security lock. If you release the key too early,
SV 104A
returns
to the last presented
VIEW
mode.
Unlocking SV 104A unit:
To unlock the unit one has to press the keys in the correct sequence.
The sequence is pre-programmed in the configuration setup (look the chapter 6.5.7.3). Note that in
case the security sequence is configured via
Supervisor
software, the simple hold of
<SCROLL>
key
for a
couple of seconds during which a countdown (“Keyboard unlock” 3… 2… 1… ) is displayed and the unit
gives you time to decide if you really want to deactivate security lock.
Figure 4-19
Unlocking the unit sequence screens
