3-14
LEFT HANDLEBAR
Clutch Lever
1
The clutch lever is used for disen-
gaging the drive to the rear wheel
when starting the engine or shift-
ing transmission gears. Squeez-
ing the lever disengages the
clutch.
Headlight Flasher Switch
2
Press the switch to flash the
headlight. The headlight high
beam will be lit when the dimmer
switch is in “
” position.
Dimmer Switch
3
“
” position
The headlight low beam and tail-
light turn on.
“
” position
The headlight high beam and tail-
light turn on. The high beam indi-
cator light also turns on.
Hazard Warning Switch “
”
4
All four turn signal lights and indi-
cators will flash simultaneously
when the switch is turned on with
the ignition switch in the “ON” or
“P” position. Use the hazard
warning lights to warn other traffic
during emergency parking or
when your vehicle could other-
wise become a traffic hazard.
CAUTION
Holding the dimmer switch
between “
” and “
” posi-
tion will light both “
” and
“
” headlight beam. This
operation can damage the
motorcycle.
Use the dimmer switch only at
“
” or “
” position.
CAUTION
Sticking some tape or placing
objects in front of the headlight
can damage the headlight.
Do not stick any tapes to the
headlight. Do not place objects
in front of the headlight.
Summary of Contents for V Storm
