Suzuki V Storm, Owner'S Manual

Page: 96 / 127

7-38
3. Remove the front wheel speed
sensor by removing the
mounting bolt
2
.
4. Loosen the axle holder bolt
3
on the right front fork.
5. Loosen the axle
4
tempo-
rarily.
NOTE: A special tool is necessary
to loosen the shaft
4
. The special
tool is available at Suzuki dealer.
6. Place an accessory service
stand or equivalent under the
swingarm to help stabilize the
rear end.
7. Carefully position a jack under
the engine and raise the jack
until the front wheel is slightly
off the ground.
8. Turn the axle counterclockwise
and draw it out.
9. Remove the front wheel speed
sensor bracket
5
.
10.Slide the front wheel forward.
11.To reinstall the wheel assem-
bly, reverse the sequence
described above.
12.After installing the wheel,
apply the front brake several
times to restore the proper
lever stroke.
CAUTION
Improper jacking may cause
damage to the fairing or oil fil-
ter.
Do not apply the jack head to
the fairing lower part or the oil
filter when jacking up the
motorcycle.