manualshive.com logo in svg

Suzuki TP-100, Owner'S Manual, Page: 17 / 25

Share
Download
Suzuki TP-100 Owner'S Manual Download Page 17

17

M O D E R N   C O N S O L E   P I A N O

5. Stop Recording - Press the PLAY/STOP button, the REC button or the recording 

track button to stop recording. The REC indicator turns off and the recorded track 

indicator is lit to show the track now contains data.
Note:

 When the record memory is full, recording will stop automatically and “FUL” will 

appear on the LED display.

Playback

1. The Track LED indicators will show which tracks contain recorded data. If you do 

not wish to hear one of the two Tracks, press the corresponding TRACK button to 

turn that track off. Its LED indicator will turn off.

2. Press the PLAY/STOP button to hear the recorded track(s). The PLAY indicator lights 

up and the beat indicators will flash per the beat pattern and tempo.
You can change the tempo of your recorded track by pressing the TEMPO button 

while the recording is being played back.
You may also accompany the recorded tracks on the keyboard while the recording 

is playing back.
Note:

 If the metronome is turned on before pressing the PLAY/STOP button to play 

back the recorded music, the metronome will sound with proper tempo and beat 

pattern which performed during your recording.

3. Press the PLAY/STOP button to stop the playback.

Playback will also stop automatically when the recording reaches its end.
In step 2, you can change the tempo of thetrack that is playing back temporarily. 

You could also change the tempo for the recorded tracks permanently:

Adjust the new tempo value

• 

Hold the REC button and press the PLAY/STOP button

• 

Tracks will playback at the new tempo and this tempo will be set for the tracks. 

Beat pattern cannot be changed.

Erasing Tracks

To erase the music recorded on the tracks:

1. Press and Hold the REC button down.
2. Press the track button that you wish to erase while you continue to hold down 

the REC button. This will immediately erase the existing data from your previous 

recording.

3. Release the REC button (the track and REC indicators are blinking).
4. Press the track button again (the indicators will go off).
5. Repeat Steps 1 through 4 until all the tracks that you desire are erased.

PLAY/STOP

TRACK 1

TRACK 2

PLAY/STOP

PLAY/STOP

REC

TRACK 1

TRACK 2

Summary of Contents for TP-100


























Reviews:

No comments