12
O W N E R ’ S M A N U A L
Layer Voice
With layer mode, you can layer (or mix) two instrument sounds together.
Press the LAYER button and its indicator lights. The LED display shows the layered
voice number (the default layered voice is strings).
To Change the LAYER instrument voice
Press the LAYER button and a voice select button simultaneously, the layer voice
mode is engaged as well but the LAYER indicator flashes.
Now you may use the Voice Select Button, the VARIATION button or –/NO +/YES
buttons to select your desired layer voice.
After finishing your selection or if you do not select an instrument in 5 seconds,the
LCD Display will revert back to the master voice and return to the voice select
mode.
The LAYER indicator LED remains on.
Press the LAYER Button again to exit the layer voice mode and the indicator turns
off.
Note:
If press the LAYER button when the DUET or LOWER functions are engaged, then
the DUET and LOWER modes will automatically disengage.
Also Note:
The volume balance between layered voice and master voice can be
adjusted. Please refer to FUNCTION chapter, for volume balance details.
Transpose
The Transpose feature can shift the pitch of the piano up or down in semitone intervals.
Press the TRANSPOSE button to engage the transpose feature and its indicator will
blink. The LED Display will show the current transpose value (the default is 0) with
the prefix “t” in front.
Use the –/NO +/YES buttons to set the transpose value ranged -6 to 6, e.g. t-5.
Five seconds after you finish your Transposing Setting the LED Display will show
the master voice and return to the voice select mode.
When the Transpose Value is not the Default Zero, the Transpose Indicator LED will
keep lighting.
Press the TRANSPOSE button again to disable the transpose feature.
LAYER
LAYER
VARIATION
TRANSPOSE
V A L U E
– / NO
+ / YES