manualshive.com logo in svg

Suzuki TP-100, Owner'S Manual, Page: 15 / 25

Share
Download
Suzuki TP-100 Owner'S Manual Download Page 15

15

M O D E R N   C O N S O L E   P I A N O

Each voice has its own reverb and chorus default setting. When a voice with chorus 

effect is selected, the CHORUS indicator will turn on automatically. The sound 

effects adjustment applies to two voices in the dual voice and duet keyboard 

mode.

Brightness

This function allows you to adjust sound brightness.

When entering this mode by pressing the EQ button. Use the –/NO +/YES button 

to set desired level of the brightness ranged 1 to 8. Press the –/NO +/YES buttons 

simultaneously to reset the brightness to default value 7.

Metronome

Press the METRONOME button; the built-in metronome will start to play with the 

current tempo and beat pattern. If you press the METRONOME button and –/NO +/

Yes button simultaneously, the metronome is engaged as well the display shows 

the current beat pattern (the default setting is 4/4). There is a doc between the 

number of beat per measure and the note definition of note. e.g. the picture below 

refers to 3/4. Use the –/NO +/YES button to change the beat pattern in sequence of 

1/4, 2/4, 3/4, 4/4, 5/4, 6/4, 6/8 and 12/8.
When the metronome sounds, the beat indicator will flash per the beat pattern.
Press any button except –/NO +/Yes, or after finish the selection or not manipulate 

for 3 second, the display shows the master voice and return to the voice select 

mode. The Metronome indicator keeps on.
Press the METRONOME button again to stop the metronome.
Note:

 Reverb and chorus sound effect does not apply to the metronome sound.

Tempo

Press the TEMPO button to enter the tempo setting mode and its indicator blinks. 

The display shows current tempo value (the default is 120) followed by a dot mark. 

Use the –/NO +/YES button to change the tempo ranged 40 – 240; press–/NO +/

YES buttons simultaneously to recall the default tempo 120. If you press and hold 

down the –/NO +/Yes button, the tempo will change continuously until release 

the button. Press any button except –/NO +/Yes, or after finish the setting or not 

manipulated for 5 second, the display will return to show the master voice and 

return to the voice select mode.

EQ

METRO 

TEMPO

Summary of Contents for TP-100


























Reviews:

No comments