HAMAMATSU-NISHI P.O. BOX 1, 432-8611 HAMAMATSU, JAPAN.
MOTERCYCLE
DATE
:
Jun. 1, 2003
PAGE
: 3
OF
8
Tighten the upper bracket side bolts to the specified
torque.
"
"
"
"
Front fork upper bracket bolt:
23 N·m (2.3 kgf-m)
A: Front fork assembly
B: 8 × 40 mm flange bolt
FRONT FENDER [Page: 13, 14 Paragraph: 2]
Install the front fender with four sets of mounting
parts as shown. Each of the four mounting bolts
requires two stepped washers.
A: Front fender
B: Stepped washer OD:17.0 mm ID:6.5 mm T:6.0 mm
C: Stepped washer OD:16.0 mm ID:6.5 mm T:3.5 mm
D: 6 × 16 mm flange bolt
STAND [Page: 17, 18 Paragraph: 2, 3]
Insert the boss of stand to the hole of frame as shown
in the photograph.
A: Stand
Place the motorcycle on the stand, then remove the
hoist hook.
