background image

10-4

3

4

WARNING

Failure to stop vehicle completely before 
doing the following could result in your 
being thrown from the ATV.

To engage reverse:

• Stop vehicle completely.
• Shift transmission to neutral.
• Bring engine to idle. Apply brake.
• Shift range lever fully toward rear.

To engage Hi-Lo range:

• Stop vehicle completely.
• Bring engine to idle.
• Operate range lever while applying 

brake.

Hi-range : Normal riding.
Lo-range : Severe load conditions.
Read owner's manual for additional 
information.

UNDER

16

WARNING

UNDER

16

Operating this ATV if you are under 
the age of 16 increases your chance 
of severe injury of death.

NEVER

 operate this ATV if you are 

under age 

16

.

Improper ATV use can result in SEVERE INJURY or DEATH

A L W A Y S   U S E

A N   A P P R O V E D  

H E L M E T   A N D
P R O T E C T I V E

G E A R

N E V E R   U S E

O N   P U B L I C

R O A D S

N E V E R   C A R R Y

P A S S E N G E R S

N E V E R   U S E

W I T H   D R U G S
O R   A L C O H O L

 • without proper training or instruction
 • at speeds too fast for your skills or the conditions
 • on public roads - a collision can occur with 
 another 

vehicle

 • with a passenger - passengers affect balance 
    and steering and increase risk of losing control 

            

:

 • use proper riding techniques to avoid vehicle
  overturns on hills and rough terrain and in turns
 • avoid paved surfaces - pavement may seriously
  affect handling and control

L O C A T E   A N D   R E A D   O W N E R ' S   M A N U A L .

F O L L O W   A L L   I N S T R U C T I O N S   A N D   W A R N I N G S .

NEVER

ALWAYS

WARNING

operate

:

Summary of Contents for LT-A450X 2007












































































































































Reviews: