Suzuki LT-A450X 2007 Owner'S Manual Download

Page: 97 / 139

5-24

FRONT BRAKE



WARNING

Failure to properly inspect and
maintain your ATV’s brake sys-
tems can be hazardous.

Improper maintenance of the
brakes increases your chances of
having an accident.

Be sure to inspect the brakes
before each use of the vehicle
according to the INSPECTION
BEFORE RIDING section. Always
maintain your brakes according to
the MAINTENANCE SCHEDULE.



WARNING

Operating the ATV in harsh condi-
tions can be hazardous if you do
not inspect brake wear often.

Operating in mud, water, sand or
other extreme conditions can
cause accelerated brake wear.
This could lead to an accident.

If you operate your vehicle under
these conditions, the brakes must
be inspected more often than rec-
ommended in the MAINTENANCE
SCHEDULE.

Summary of Contents for LT-A450X 2007












































































































































Search results

Summary of Contents for LT-A450X 2007

Reviews:

Related manuals for LT-A450X 2007

Brands by name

Popular brands

Suzuki LT-A450X 2007, Owner'S Manual

Search results

Summary of Contents for LT-A450X 2007

Reviews:

Related manuals for LT-A450X 2007

Brands by name

Popular brands