Suzuki LT-A450X 2007 Owner'S Manual Download

Page: 79 / 139

5-6

BATTERY

The battery is located under the seat.
This battery is a sealed type battery
battery and requires no maintenance
of fluid level and gravity. But have
your dealer check the charging condi-
tion of the battery periodically.

If the battery is discharged, recharge
the battery. The standard charging
rate is 1.4A × 5 to 10hr and the maxi-
mum charging rate is 6.0A × 1hr.



WARNING

Hydrogen gas produced by batter-
ies can be hazardous.

Batteries produce flammable
hydrogen gas which can explode
if exposed to flames or sparks.

Keep flames and sparks away
from the battery. Never smoke
when working near the battery.

CAUTION

Exceeding the maximum charging
rate for the ATV battery can dam-
age your ATV.

If you charge the battery at a rate
too high, it will decrease the life of
the battery.

Never exceed the maximum charg-
ing rate.

CAUTION

Reversing the battery lead wires
can harm your ATV.

Reversing the battery lead wires
can damage the charging system
and the battery.

The red lead must go to the (+)
positive terminal and the black (or
black with white tracer) lead must
go to the (–) negative terminal.

Summary of Contents for LT-A450X 2007












































































































































Search results

Summary of Contents for LT-A450X 2007

Reviews:

Related manuals for LT-A450X 2007

Brands by name

Popular brands

Suzuki LT-A450X 2007, Owner'S Manual

Search results

Summary of Contents for LT-A450X 2007

Reviews:

Related manuals for LT-A450X 2007

Brands by name

Popular brands