Suzuki LT-A450X 2006 Owner'S Manual Download

Page: 21 / 139

2-6

IGNITION SWITCH

The ignition switch has three posi-
tions.

“OFF” position

All electrical circuits are cut off. The
engine will not start. The key can be
removed.

“ON” position

The ignition circuit is on and the
engine can be started. The key can-
not be removed in this position.

“



” position

The ignition circuit is complete and
the headlights and taillights turn on.
The key cannot be removed in this
position.

CAUTION

Leaving the ignition switch in the
“



” position for a long time can

damage the ATV’s battery.

The battery will run down if the
lights are no for a long time when
the engine is not running.

Always leave the ignition switch in
the “OFF” position when not oper-
ating the ATV.

Summary of Contents for LT-A450X 2006












































































































































Search results

Summary of Contents for LT-A450X 2006

Reviews:

Related manuals for LT-A450X 2006

Brands by name

Popular brands

Suzuki LT-A450X 2006, Owner'S Manual

Search results

Summary of Contents for LT-A450X 2006

Reviews:

Related manuals for LT-A450X 2006

Brands by name

Popular brands