Suzuki LT-A450X 2006 Owner'S Manual Download Page 99

Page: 99 / 139

5-26



WARNING

Failure to maintain the brake pads
and replace them when recom-
mended can be hazardous.

Riding with unevenly worn brake
pads will increase your chances of
having an accident.

If you need to replace brake pads,
have your Suzuki dealer do this
work. Inspect and maintain the
brake pads as recommended.



WARNING

Riding this ATV after brake system
repair or brake pedal replacement
without pumping the brake lever/
pedal can be hazardous.

If you do not pump the brake
lever/pedal before starting, you
may get poor braking performance
and this may result in an accident.

Pump the brake lever/pedal sev-
eral times until brake pads are
pressed against the brake disks
and proper lever/pedal stroke and
firm feel are restored.



WARNING

Replacing only one of the two
brake pads can be hazardous.

Replacing only one brake pad can
result in uneven braking action.

Replace both pads together.

Summary of Contents for LT-A450X 2006












































































































































Search results

Summary of Contents for LT-A450X 2006

Reviews:

Related manuals for LT-A450X 2006

Brands by name

Popular brands

Suzuki LT-A450X 2006, Owner'S Manual

Search results

Summary of Contents for LT-A450X 2006

Reviews:

Related manuals for LT-A450X 2006

Brands by name

Popular brands