Suzuki kq750 2008, Service Manual

Page: 32 / 576

0B-5 Maintenance and Lubrication:
5) Drain a small amount of engine coolant and
disconnect the radiator upper hose of thermostat
side. Refer to “Cooling System Inspection (Page 0B-
15)”.
6) Remove the spark plug cap (4) and spark plug (5).
Refer to “Spark Plug Cap and Spark Plug Removal
and Installation in Section 1H (Page 1H-3)”.
7) Remove the valve timing inspection plug (6).
8) Turn the crankshaft to bring the “TDC” line “A” on the
generator rotor to the lug mark “B”.
9) Remove the cylinder head cover. Refer to “Engine
Top Side Disassembly in Section 1D (Page 1D-17)”.
NOTE
• Check the engraved lines “C” on the
camshafts, so it is parallel with the mating
surface “D” on the cylinder head cover.
• The valve clearance should be taken
cylinder is at Top Dead Center (TDC) of
compression stroke.
• The clearance specification is for COLD
state.
• To turn the crankshaft for clearance
checking, be sure to use a wrench, and
rotate in the normal running direction.
I831G1020012-01
5
4
I831G1020085-03
6
I831G1020011-02
“A”
“B”
I831G1140086-03
“C”
“C”
“D”
“D”
“C”
“C”
EX IN
“D”
“D”
I831G1020013-03