Suzuki Intruder VL800, Manual

Page: 29 / 142

3-8
INSTRUMENT PANEL
The oil pressure indicator light
3
,
engine coolant temperature indi-
cator light
5
, fuel injection sys-
tem indicator light
6
, LCD and
meter needle work as follows to
confirm their function when the
ignition switch is turned to the
“ON” position.
• The oil pressure indicator light
3
, engine coolant tempera-
ture indicator light
5
and fuel
injection system indicator light
6
come on for 2 seconds.
• The meter needle moves to
the full scale position and
returns to the home position.
• All LCD segments appear/dis-
appear and then show the nor-
mal display.
SPEEDOMETER
1
The speedometer indicates the
road speed in kilometers per hour
and miles per hour.
If the speedometer needle does
not point to zero, follow the proce-
dure below to reset the speedom-
eter.
1. Press and hold the button
9
and turn on the ignition switch.
2. Hold the button
9
for 3 sec-
onds.
NOTE: The reset procedure, from
step 1 to step 2, should be per-
formed within 10 seconds.
TURN SIGNAL INDICATOR
LIGHT “

”
2
When the turn signals are being
operated either to the right or to
the left, the indicator light will blink
intermittently.
NOTE: If a turn signal light is not
operating properly due to bulb fila-
ment or circuit failure, the indica-
tor light blinks more quickly to
notify the rider of the existence of
a problem.
FI
E F
A B
GEAR