Suzuki GRAND VITARA 2008, Owner'S Manual

Page: 153 / 308

5-12
OTHER CONTROLS AND EQUIPMENT
78KS0-37E
Turning power on/off
Press the power on/off knob (1).
The unit starts in the function mode it was
in when the power was turned off last.
Adjusting the volume
Turn the volume control knob (1).
Turning it clockwise increases the volume;
turning it counterclockwise decreases the
volume.
NOTE:
While driving, adjust the volume to an
extent that sound and/or noise coming
from outside the car can be heard.
Mute
1) Press the MUTE button (5).
Press the MUTE button (5) again, it
returns to the original volume.
Adjusting the clock
1) Press the clock button H (6) to adjust
the hours.
Press the clock button M (7) to adjust
the minutes.
2) Hold the button depressed to automati-
cally increment the number.
3) To reset the clock to an hour signal,
press the clock button H (6) while hold-
ing the clock button M (7) depressed.
NOTE:
When the clock has not been set, the time
“12:00” will flash in the display.
Clock reset is effected as follows:
• When minutes are between 00 and 29,
the clock will reset to the current hour.
(example: 12:23
➔
12:00)
• When minutes are between 30 and 59,
the clock will reset to the next hour.
(example: 12:38
➔
1:00)
Adjusting bass/treble/balance/fader
1) Press the tone/balance/fader control
knob (2).
Each time it is pressed, sound adjust-
ment is changed as follows:
66J224
2) Turn the tone/balance/fader control
knob (2) to adjust the sound.
Adjusting the AVC (Auto volume con-
trol)
The Auto Volume Control (AVC) function
automatically adjusts (increases/
decreases) the sound volume in accor-
dance with vehicle speed. The AVC control
is provided with three selectable levels
(LEVEL OFF, 1, 2, 3). The range of volume
adjustment increases together with the
LEVEL number,
1) Press the tone/balance/fader control
knob (2) until the AVC adjustment mode
is selected.
2) Turn the tone/balance/fader control
knob (2) to select the desired AVC
adjustment level. (Initial setting: LEVEL
2)
Adjusting the contrast of the display
1) Press the tone/balance/fader/control
knob (2) and preset button 5 (3), preset
button 6 (4) simultaneously.
2) To adjust the contrast of the display,
turn the power on/off knob (1).
Cancel the dimmer condition
Each time you press the power on/off knob
(1) for two seconds with the lighting switch
on, the background brightness of the audio
display will switch between normal and
dimmed.
Bass adjustment ( BASS 0 )
Treble adjustment ( TREBLE 0 )
Balance adjustment ( BALANCE 0 )
Fader adjustment ( FADER 0 )
AVC adjustment ( AVC LEVEL 2 )
Original mode
Interior Light Switch: 7