Suzuki GRAND VITARA 2008 Owner'S Manual Download Page 267

Page: 267 / 308

7-44

INSPECTION AND MAINTENANCE

78KS0-37E

For rear wipers:

80G146

1) Hold the wiper arm away from the win-

dow.

2) Remove the wiper frame from the arm

as shown.

3) Slide the blade out as shown.

65D151

NOTE:
Do not flex the wiper blade frame end
more than necessary. If you do, it can
break off.

54G135

(1) Retainer

4) If the new blade is provided without the

two metal retainers, move them from
the old blade to the new one.

5) Install the new blade in the reverse

order of removal.
Make sure the blade is properly
retained by all the hooks.

6) Reinstall wiper frame to arm in the

reverse order of removal.

Summary of Contents for GRAND VITARA 2008





















































































































































































































































































































Search results

Summary of Contents for GRAND VITARA 2008

Reviews:

Related manuals for GRAND VITARA 2008

Brands by name

Popular brands

Suzuki GRAND VITARA 2008, Owner'S Manual

Search results

Summary of Contents for GRAND VITARA 2008

Reviews:

Related manuals for GRAND VITARA 2008

Brands by name

Popular brands