Suzuki GRAND VITARA 2008, Owner'S Manual

Page: 128 / 308

3-37
OPERATING YOUR VEHICLE
78KS0-37E
Hill descent control switch
79K051
(1) Hill descent control switch
To activate the hill descent control system:
1) Turn the transfer switch to the “4H
LOCK” or “4L LOCK” position.
2) Shift the gearshift lever into a forward
gear or reverse gear.
3) Push the hill descent control switch (1)
when the vehicle speed is under 25 km/
h (15 mph). The hill descent control
indicator on the instrument cluster will
come on and the hill descent control
system will be activated.
If the transfer switch is in the “4H LOCK”
position, vehicle speed is maintained at
approximately 10 km/h (6 mph) when
going down a hill.
If the transfer switch is in the “4L LOCK”
position, the vehicle speed is maintained at
approximately 5 km/h (3 mph) when going
down a hill.
The brake/tail lights come on and the slip
indicator light blinks while the hill descent
control system applies the brakes to main-
tain the vehicle speed.
If the accelerator or brake pedal is
depressed while the hill descent control
system is activated, the system will stop
working temporarily. As soon as the accel-
erator or brake pedal is released, the hill
descent control system begins to function
again if the hill descent control operating
conditions are fulfilled. However, when the
vehicle speed exceeds 25 km/h (15 mph),
the hill descent control system will be
deactivated automatically.
To deactivate the hill descent control sys-
tem, push the hill descent control switch
again.
NOTE:
You may hear a sound coming from the
engine when the hill descent control sys-
tem is activated. This sound is normal and
does not indicate a malfunction.
Hill descent control Indicator Light
79K050
When the hill descent control system is
activated, the hill descent control indicator
comes on.
NOTE:
If any of the following conditions occur
when the hill descent control system is
activated, the hill descent control indicator
blinks.
• The transfer switch is in the “4H” or “N”
position
• The gearshift lever is in the “P” position
• The gearshift lever is moved to the “N”
position while driving
• The vehicle speed exceeds 25 km/h (15
mph)
(1)
CAUTION
When the hill descent control system
is used continuously for a long time,
the temperature of the brake system
may increase and the hill descent
control system may be disabled tem-
porarily. The hill descent control indi-
cator blinks to let you know the
system is disabled. Depress the
brake pedal and stop the vehicle in a
safe place. When the temperature of
the brake system goes down, the hill
descent control indicator will come
on and the system is activated again.