96 VL1500K5 (’05-MODEL)
• Connect a proper lead wire into the fuel pump lead wire cou-
pler (fuel pump side) and apply 12 volts to the fuel pump
(between Y/R wire and B/W wire) for 10 seconds and mea-
sure the amount of fuel discharged.
Battery
+
terminal
(Yellow with red tracer)
Battery
-
terminal
(Black with white tracer)
If the pump does not discharge the amount specified, it means
that the fuel pump is defective or that the fuel filter is clogged.
"
Fuel discharge amount: 168 ml and more/10 sec.
(5.7/5.9 US/Imp oz)/10 sec.
NOTE:
The battery must be in fully charged condition.
FUEL PUMP RELAY INSPECTION
Fuel pump relay is located at the right side of the ECM.
• Remove the left frame head cover.
(
!
VL1500 Service Manual 6-3)
• Remove the fuel pump relay.
First, check the insulation between
A
and
B
terminals with
pocket tester. Then apply 12 volts to
C
and
D
terminals,
+
to
C
and
-
to
D
, and check the continuity between
A
and
B
.
If there is no continuity, replace it with a new one.
FUEL PUMP ASSEMBLY REMOVAL
• Remove the seats
1
. (
!
Page 121)
• Remove the speedometer and fuel inlet cover
2
.
(
!
VL1500 Service Manual 6-3)
• Remove the left frame head cover
3
and left frame upper
cover
4
. (
!
VL1500
%
Service Manual 6-3)
SA
MP
LE
