VL1500K5 (’05-MODEL) 59
Step 1 (When indicating P0115-H:)
1) Turn the ignition switch OFF.
2) Check the EOT sensor coupler for loose or poor contacts.
If OK, then check the EOT sensor lead wire continuity.
7
3) Remove the left frame upper cover.
(
!
VL1500 Service Manual 6-3)
4) Disconnect the EOT sensor coupler and ECM coupler.
5) Check the continuity between B/Bl wire
A
and terminal
I
.
6) Also, check the continuity between B/G wire
B
and terminal
D
.
"
EOTS lead wire continuity: Continuity (
,
)
#
09900-25008: Multi-circuit tester set
09900-25009: Needle pointed probe set
-
Tester knob indication: Continuity test (
,
)
Is the continuity OK?
7) After repairing the trouble, clear the DTC using SDS tool.
(
!
Page 42)
1
1
!
ECM coupler (Harness side)
YES
Go to Step 2.
NO
• B/BI, B/Br wire or sub harness (B/BI or B/G
wire) open.
• Loose or poor contacts on the sub harness cou-
pler.
ECM
Sub harness
1
EOT
B/G
B/BI
B/BI
B/Br
SA
MP
LE
