VL1500K5 (’05-MODEL) 67
Step 1 (When indicating P0110-H:)
1) Remove the right frame upper cover.
(
!
VL1500 Service Manual 6-3)
2) Turn the ignition switch OFF.
3) Check the IAT sensor coupler for loose or poor contacts.
If OK, then check the IAT sensor lead wire continuity.
4) Remove the left frame upper cover.
(
!
VL1500 Service Manual 6-3)
5) Disconnect the IAT sensor coupler and ECM coupler.
6) Check the continuity between Dg wire
A
and terminal
2
.
7) Also, check the continuity between B/Br wire
B
and terminal
D
.
"
IATS lead wire continuity: Continuity (
,
)
#
09900-25008: Multi-circuit tester set
09900-25009: Needle pointed probe set
-
Tester knob indication: Continuity test (
,
)
Is the continuity OK?
8) After repairing the trouble, clear the DTC using SDS tool.
(
!
Page 42)
1
YES
Go to Step 2.
NO
Dg wire or B/Br wire open.
1
!
ECM coupler (Harness side)
SA
MP
LE