![background image](http://html1.mh-extra.com/html/suzohapp/flow-18-cctalk/flow-18-cctalk_product-manual_1408277004.webp)
Manual 18-ccTalk
Version 0.6
Page 3
2. Change hopper for different coin sizes
The hopper is configured to accept most Euro coins (
(€0,20 to €2.00) and the British Pound . For
special situations there are other disks available adapt the hopper to other coins. Changing
configuration requires removing the cup and changing two parts, the payout disk and the insert plate.
For correct parts for you coin see the following two tables.
Payout discs
Mark
Diameter (mm)
Thickness (mm)
Part no
Currency
13
16.00-18.99
1.50-2.09
18-0020-13
€0.01 €0.02
14
19.00-21.99
1.50-2.09
18-0020-14
€0.05 €0.10
15
22.00-28.49
1.50-2.09
18-0020-15
16
28.50-32.00
1.50-2.09
18-0020-16
23
16.00-18.99
2.10-3.20
18-0020-23
24
19.00-21.99
2.10-3.20
18-0020-24
25
22.00-28.49
2.10-3.20
18-0020-25
€0.20 €0.50 €1.00 €2.00 £1.00
26
28.50-32.00
2.10-3.20
18-0020-26
Table 1: Payout discs
Coin insert plates
Mark
Diameter (mm)
Part no
Currency
3
16.00-18.99
18-0010-3
€0.01 €0.02
4
19.00-21.99
18-0010-4
€0.05 €0.10
5
22.00-28.49
18-0010-5
€0.20 €0.50 €1.00 €2.00 £1.00
6
28.50-32.00
18-0010-6
Table 2: Coin insert plates
2.1. Hopper disassembly
Figure 1.
1. Remove the two screws at the bottom of the cup.
2. You can now lift the cup of the hopper.
3. Use a flat screw driver to remove the agitator.
4. You can now loosen the screw and remove the coin disk.
5. The coin insert cover can now be removed.
6. You can now switch the coin insert plate.
To reassemble place the correct coin insert plate and disk. Then follow the above steps in reverse
order.