22
MP-225A MOTORIZED MICROMANIPULATOR SYSTEM OPERATION MANUAL – REV. 2.04 (20211111)
Table C-1. MP-225A Controller cables and receptacles/connectors.
Controller Rear
Panel Port
Connector/Recept
acle
Cable Connector
Types
Connects to ...
Cable Type
Cable
Max.
Length
Power Adapter
3-pin male
connector
3-pin power
standard (female)
|
3-pin male
(Geographical region
dependent)
Mains power source.
10A, 250V,
with safety
ground plug
3 meters
(approx.
10 feet)
DRIVE MODULE
(25-Pin DSUB
female receptacle
DB-25 male
│
DB-25 female
(straight-through)
MP-225/M adapter
(25-Pin DSUB male
connector)
(MP-225/M Adapter has
three RJ45 connectors for
three cables that connect
to the MP-225/M
electromechanical)
Minimum of
26 awg
stranded
wire with
500 Volt (see
note)
3 meters
(approx.
10 feet)
Power Adapter
(fixed)
|
ID 2.1 x OD 5.5 mm
Barrel Plug (male)
ROE/Controller Cabinet:
POWER receptacle (center
pin positive)
UL1185
18AWG
1.8 meters
(approx. 6
feet)
ROE/Controller
Cabinet:
GROUND
(1-pin Banana-
style female
receptacle)
Banana male
|
Alligator clip
(hooded)
Ground/earth source (user
determined)
NOTE: A ferrite at the controller end is strongly recommended (Fair-Rite part number 0443164-251).
Fair-Rite Products Corp., P.O. Box J, One Commercial Row, Wallkill, NY, 12589, USA
