Sutron TPEM070ZGW, User Manual

Page: 28 / 78

Installation and Commissioning P Line Maritim HMI
28
2. Confirm your selection with the green check.
2.4.1.2.6 Display
This category offers the following functions:
–
Brightness and orientation of the display
– Calibration of the touch
Brightness 1. Adjust the brightness using the slider or the arrow symbols.
2. Confirm your selection with the green check.
Orientation 1. Turn the orientation using the buttons Turn left and Turn right to the desired
position.
2. Confirm your selection with the green check.
Depending on device type, the new orientation is accepted immediately or after a
reboot of the operating device.
3. Press the
OK button.
Calibrate Touch 1. Press the Recalibrate button.
Depending on device type the calibration is automatically started immediately or
after a reboot of the operating device.
2. Press the displayed marks to calibrate the touch.
2.4.1.2.7 Write Filter
This category offers the following functions:
–
Enhanced write filter (EWF)
– File based write filter (FBWF)
– Hibernate once, resume many (HORM)
EWF The enhanced write filter (EWF) protects your system from write access and in-
stead writes the data to the main memory.
Enable EWF
1. Press the Enable EWF button.
2. Confirm your selection with the green check.
3. Restart the operating device for the changes to take effect.
Disable EWF
1. Press the Disable EWF button.
2. Confirm your selection with the green check.
3. Restart the operating device for the changes to take effect.
FBWF The file based write filter (FBWF) protects your system from write access and in-
stead writes the data to the main memory. The selected folders are not protected.
Enable FBWF
NOTICE
With enabled write protection, all data in the main memory of the operating de-
vice are lost after a restart.
NOTICE
With enabled write protection, all data in the main memory of the operating de-
vice are lost after a restart.