7. Configuration
7.3 Configuration using the optional sensor display
With the Sensor display it is possible to show the value of the velocity,
the flow and the consumption. Moreover it shows error messages and it
is possible to change the configuration setting of the sensor.
"Enter key
” =
“
Up key” =
"Down key” =
7.3.1 Starting process
After power up, the display starts automatically with a initialisation
procedure. During the next eight seconds the display will show the
current software version and starts the connection to the sensor. Now
the display goes to the standard mode, showing the online values, flow,
velocity and pressure, alternately.
7.3.2 About the home page
Home page:
•
Status bar
•
Moving bar to indicate flow
and cut-off value
•
Measuring values
26
