SWD030 Inclusive Roundabout
Outer Gap Adjustment Instructions
Sheet 5 of 6 Rev 01
M10 Adjuster screws Ref
HSS510
Upper ring section
Gap to be maximum 8mm
Before the safety surface is laid the upper ring sections can be adjusted if
required.
The upper ring is in four stainless steel quarters, each quarter can be adjusted
separately to increase or decrease the gap to the rotating frame.
The upper ring sections are secured with M10 bolts. By loosening these and
inserting spacer washers the gap can be increased. The maximum allowable
gap is 8mm.
Once the roundabout runs freely, reassemble the deck and frame assembly. Fit
the centre pole, use spacer washers if required to ensure the bracket does not
rub on the deck.