Start-up / Operation
Adjustment system - Installation Instructions
Page 39
7
Operation
7.1
Warning Notices for Operation
WARNING
Crushing or amputation risk due to
moving
parts
There are risks posed by removing components of the protective housing.
Do not operate the Height Adjustment System if the protective housing of the components has
been removed.
IMPORTANT
Do not allow the electrical Height Adjustment System to be operated by
children. If the device is used near children, ensure supervision by adults and activate the
Childproof lock (see Section 7.6.1).
7.2
Tests Prior to Switching the Machine On
Check all electrical and mechanical connections.
Check whether there are damages to electrical wires which may have occurred during
unpacking or installing of the system.
Check all system components in order to ensure that they are fastened securely to the
workplace.
Make sure that the maximum load is not exceeded. The maximum load is the entire load
including the raised workplace and all objects that are located on the working surface.
Connect the workplace to the power supply only after checking the above-mentioned
aspects.
Allow the controller to adjust to the change from cold to hot environments for a few hours
before putting them into operation, otherwise condensed water may damage them.
