Installation
Adjustment system - Installation Instructions
Page 19
6
Installation
CAUTION
Danger of crushing
There is a risk of crushing due to the short distance to other objects and structures.
Make sure that the workplace has a minimum distance of 50 mm from other objects or struc-
tures. Make sure that walls, furniture, electrical wiring, or other solid structures do not impede the
movement of the workplace during operation.
IMPORTANT
The installation of the component must be carried out by professional personnel
of SUSPA GmbH, other professional personnel, maintenance personnel and private persons.
IMPORTANT
Do not lift the Height Adjustment System on the motor cables or power cords.
Keep the motor cable and power cable away from heat, sharp edges, and moisture. Immediately
suspend the operation of the product if you notice that the motor cable or power cord are
damaged and replace the damaged components without delay. Never attempt to repair damaged
motor cables or power cords.
IMPORTANT
Check all components for any damage that may have occurred during transport
or installation before operating the system. Do not try to dismantle the system or system
components. Contact SUSPA GmbH in the event that components must be repaired or replaced.
6.1
Unpacking
Proceed with the necessary diligence and caution when unpacking the system components. Do not
use any sharp-edged objects, cutters or knife blades in order to prevent damage to near electrical
cables or components that may get damaged easily.
6.1.1
Disposal of Transport and Warehouse Packaging
The disposal of the transport and warehouse packaging should be performed in accordance with
the local disposal regulations and environmental protection laws applicable in the operator's
country.