background image

WARNING!: Read, understand and follow the safety 

rules in this document before operating this product.

LAMM01

Póliza de garantía. Este producto está garantizado por URREA HERRAMIENTAS 

PROFESIONALES, S.A. DE C.V., km 11,5 Carr. A El Castillo, 45680 El Salto, Jalisco. 

UHP900402Q29, Teléfono 01 33 3208-7900 contra defectos de fabricación y mano 

de obra con su reposición o reparación sin cargo por el período de 1 año. Para 

hacer efectiva esta garantía, deberá presentar el producto acompañado de su 

comprobante de compra en el lugar de adquisición del producto o en el domicilio 

de nuestra planta mismo que se menciona en el primer párrafo de esta garantía. 

En caso de que el producto requiera de partes o refacciones acuda a nuestros 

distribuidores autorizados. Los gastos que se deriven para el cumplimiento de esta 

garantía serán cubiertos por Urrea Herramientas Profesionales, S.A. de C.V. Esta 

garantía no será efectiva en los siguientes casos: 

a).- Cuando la herramienta se haya utilizado en condiciones distintas a las 

normales. 

b).- Cuando el producto hubiera sido alterado de su composición original o 

reparado por personas no autorizadas por el fabricante o importador respectivo.

This product has a 1 year warranty by Urrea Herramientas Profesionales S.A. de 

C.V. against any manufacturing defect, with its repair or replacement during its life 

expectancy. The warranty is not applicable if the product does not show the URREA 

brand, if the product is worn out by its daily use, shows signs of abuse, damage, 

its original composition has been altered, or specifies a different warranty. In order 

to make the warranty effective, the product must be taken to the company or to the 

place of purchase along with its receipt.

IMPORTADO POR / IMPORTED BY: URREA HERRAMIENTAS PROFESIONALES 

S.A. DE C.V. km 11,5 Carretera a El Castillo, C.P. 45680 El Salto, Jalisco, México 

Tel. 01 (33) 3208-7900 Made in China / Hecho en China R.F.C. UHP900402Q29       

05-G19

HOW THE PRODUCT WORKS

This photocatalytic insect killer uses led light that emits with 

a 1365 nm wave length, which is the best frequency to attract 

insects such as mosquitoes. Mosquitoes will fly near and are 

then shocked to death by high voltage grid.

There is convenient tray in the bottom so that the dead  bugs 

can be cleaned out easily and effortlessly.

Place the lamp in a darker part of the room with no air 

current. Keep the doors and windows shut and let the insect 

killer do it’s work.

In general place the insect ten or more feet away from any 

person.

Don’t place it on your beside table because the insects will be 

attracted in your direction which is not  what you want.

The insect killer should be  placed in a height of 6-7 feet of 

the floor

HOW THE USE

1.  Insect the plug into a standard 110-240 V~ mains 

supply. Hang or place  the unit  approx 6 to 7 ft high for 

optimum efficiency and so that is away from children 

and pets.

2.  Disconnect plug from socket to switch off.

TECHNICAL FEATURES

1.  1365 nm wavelength is the best frequency to attract 

insects such mosquitoes.

2.  Made from ABS  material: strong and durable.

3.  High voltage to kill insects such as mosquitoes.

PARTS & ACCESSORIES AVAILABLE

Material ……….………………..………………........................ ABS

Color ………………………………………….....................… Negro

Input.................................................................................. 110 V~

Power.... ….…………………….…….………............................ 3 W

Frequency …………………………………......................... 50/60Hz

Mosquito killing wavelength.........................................1365 nm

Scope range ………………………........................…........... 30 m

2

Working temperature.............................................. -10°C a 50°C

Current .......................................................................... 0,0273 A

Energy consumption................................................... 0,003 kWh

Light supply............................................................. LED UV SMD

CLEANING

Dead insects will need removing from waste tray and the grid 

wires. To do so, first unplug the unit from the mains supply 

and wait from approx.

10-15 minutes. The remove the waste tray from the insect 

killer and clean the tray. Attach the tray back to the insect 

killer. Should any insects stick between the wire grids, do 

not attempt to remove them  with  a metal object but use a 

cleaning brush.

WARNING

When using the appliances, basic precautions should always 

be followed, including the following:

•  High voltage grid keep away from children and pets

•  Turn off  the power while  you  disassembled and clean the 

insect killer.

•  Do no touch the grid when insect killer is switched on or 

has  just been working or has powered off.

•  Keep away from water  and rain.

•  Do no let children or pets play with or near the insect killer.

•  Don’t try to open neither fix any part of this product.

•  Don’t use if the plug, cord or any part of the lamp is 

damaged.

•  Don’t introduce any metal object to the grid.

•  This device is not to be used by people (including kids) 

who physical, sensorial or mind capacities be different or 

reducted, or don’t have experience or knowledge, at least 

they receive instructions capacitation to know the device 

functions by a person responsive by the security.

•  The children should be check to ensure the security and to 

check that they don’t use the device as a toy.

•  If the cord is damaged if have to be change by the maker, 

for the authorized  services agent or by qualified personal 

to avoid any danger.

FOR INDOOR USE

CONTENT

1 Electric mosquito killer

1 Cleaning brush

Reviews: