General
10
• Always remove the mains plug after use. Allow the device to cool down
completely before storing it.
• If you observe damage to the device or the power cable, remove the mains
plug immediately. Ensure that the device is checked immediately by an
electrician. It may only be put into operation once again after repairs have
been correctly carried out (see chapter 5).
• Keep the safety instructions in a safe place.
2
General
Before first operating the HKP 2.0 E adhesive pistol, please read this operat-
ing manual carefully and thoroughly through. Please pay special attention to
the safety information in chapter 1.
This operating manual must be available to every user.
All position numbers stated in this operating manual (e.g. “hook nozzle (1)”)
apply to the figure on page 2.
2.1
Scope of application
The HKP 2.0 E is intended for use with Döllken hot-melt adhesive in candle
form (correct intended use).
Any other usage is unauthorized.
2.2
Specifications
Description
HKP 2.0 E
Included in delivery
adhesive pistol, instruction handbook
Dimensions [mm]
390 x 230 x 90
Weight [g]
1,100
Operational voltage [V AC]
220 to 240, 50 Hz
Power consumption [W]
600
Insulating Class
Class 1
Safety class
IP20
Working temperature [°C]
200 to 220 non-adjustable
Controller
electronic
Adhesive
Döllken hot-melt adhesive, Ø 18 mm
Adhesive performance [kg/h*]
3.5 with switching step „
+
“
2.1 with switching step „
-
“
non-adjustable
GB
H1079XM_191202.indd 10
18.12.19 09:11
Summary of Contents for Dollken Profiles HKP 2.0 E
Page 33: ...33 1 1 1 1 200 C Xi 1 2 1 2 D llken RUS H1079XM_191202 indd 33 18 12 19 09 11...
Page 34: ...34 5 2 HKP 2 0 E 1 1 2 2 1 HKP 2 0 E D llken RUS H1079XM_191202 indd 34 18 12 19 09 11...
Page 37: ...37 Bild 2 3 4 D llken 18 C 3 5 6 20 3 6 1 2 3 1 RUS H1079XM_191202 indd 37 18 12 19 09 11...
Page 38: ...38 4 4 4 5 6 RUS H1079XM_191202 indd 38 18 12 19 09 11...
