Safety information
9
1
Safety information
1.1
Possible hazards
Burn hazard!
The hook nozzle (1) and melted hot-melt adhesive can reach
temperatures of over 200 °C. Always wear heat protecting gloves when
using the glue gun.
Xi
Irritating smells!
Hot-melt adhesives give off vapors which can have irritating smells.
Ensure that there is sufficient ventilation.
If the device is improperly used, isolated instances of mucous
membrane irritation could occur. You should contact a doctor
immediately in such cases!
1.2
Information for safe operation
In order to protect against malfunctions and maloperation, always follow the
following information exactly:
• Do not operate the device unsupervised.
• Do not insert your finger into the opening at the back of the device.
• Remove combustible or heat-sensitive objects from the vicinity of the hook
nozzle (1).
• The warmed-up device must be placed on its stand (2). It must never be
placed on its side.
• Use only after the device has completely heated up.
• Protect the device from moisture and wetness (electric shock protection).
Do not use the power tool when it is damp or in a damp environment.
• Observe the instructions for Döllken hot-melt adhesive (processing error
avoidance).
• If working above head height, ensure that drops do not form to protect
against burns to personnel or working equipment.
• Opening the device during operation is not permitted - risk of injury!
• Always remove the power cable before carrying out any work to the device
(maintenance, cleaning).
• The device may only be operated on sockets with a protective earth.
• Any extension cables must also be provided with a protective earth. Check
that the extension cable is in good condition before use.
• Do not carry the tool by the cable and do not pull on the cable to discon-
nect the plug from the socket.
Protect the cable from heat, oil and sharp edges. Do not severely bend the
cable when packing.
GB
H1079XM_191202.indd 9
18.12.19 09:11
Summary of Contents for Dollken Profiles HKP 2.0 E
Page 33: ...33 1 1 1 1 200 C Xi 1 2 1 2 D llken RUS H1079XM_191202 indd 33 18 12 19 09 11...
Page 34: ...34 5 2 HKP 2 0 E 1 1 2 2 1 HKP 2 0 E D llken RUS H1079XM_191202 indd 34 18 12 19 09 11...
Page 37: ...37 Bild 2 3 4 D llken 18 C 3 5 6 20 3 6 1 2 3 1 RUS H1079XM_191202 indd 37 18 12 19 09 11...
Page 38: ...38 4 4 4 5 6 RUS H1079XM_191202 indd 38 18 12 19 09 11...