background image

      

   

Installation   Manual   

 

 

Page | 4       [email protected] 

   
   

   

+1.818.937.0700    877.CAMERA.8    www.arecontvision.com    [email protected] 

Surround

Video®   G5

 

Warranty Information 

Global (3 Year) Limited Warranty

 

ARECONT VISION warrants to Purchaser (and only Purchaser) (the “Limited Warranty”), that: (a) each 
Product shall be free from material defects in material and workmanship for a period of 

thirty-six (36) 

months

 from the date of shipment (the “Warranty Period”); (b) during the Warranty Period, the 

Products will materially conform with the specification in the applicable documentation; (c) all licensed 
programs accompanying the Product (the “Licensed Programs”) will materially conform with applicable 
specifications. Notwithstanding the preceding provisions, ARECONT VISION shall have no obligation or 
responsibility with respect to any Product that (i) has been modified or altered without ARECONT 
VISION’s written authorization; (ii) has not been used in accordance with applicable documentation; (iii) 
has been subjected to unusual stress, neglect, misuse, abuse, improper storage, testing or connection; 
or unauthorized repair; or (iv) is no longer covered under the Warranty Period. ARECONT VISION 
MAKE NO WARRANTIES OR CONDITIONS, EXPRESS, IMPLIED, STATUTORY OR OTHERWISE, 
OTHER THAN THE EXPRESS LIMITED WARRANTIES MADE BY ARECONT VISION ABOVE, AND 
ARECONT VISION HEREBY SPECIFICALLY DISCLAIMS ALL OTHER EXPRESS, STATUTORY AND 
IMPLIED WARRANTIES AND CONDITIONS, INCLUDING THE IMPLIED WARRANTIES OF 
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT AND THE 
IMPLIED CONDITION OF SATISFACTORY QUALITY. ALL LICENSED PROGRAMS ARE LICENSED 
ON AN “AS IS” BASIS WITHOUT WARRANTY. ARECONT VISION DOES NOT WARRANT THAT (I) 
THE OPERATION OF THE PRODUCTS OR PARTS WILL BE UNINTERRUPTED OR ERROR FREE; 
(II) THE PRODUCTS OR PARTS AND DOCUMENTATION WILL MEET THE END USERS’ 
REQUIREMENTS; (III) THE PRODUCTS OR PARTS WILL OPERATE IN COMBINATIONS AND 
CONFIGURATIONS SELECTED BY THE END USER; OTHER THAN COMBINATIONS AND 
CONFIGURATIONS WITH PARTS OR OTHER PRODUCTS AUTHORIZED BY ARECONT VISION 
OR (IV) THAT ALL LICENSED PROGRAM ERRORS WILL BE CORRECTED. 

For RMA and Advance Replacement information visit http://www.arecontvision.com 

   

Summary of Contents for AV12585PM




































Reviews: