Installation Manual
Page | 33 [email protected]
+1.818.937.0700 877.CAMERA.8 www.arecontvision.com [email protected]
Surround
Video® G5
QoS –
Quality of Service guarantees a certain level of a specified resource to selected traffic on a
network. A QoS-aware network prioritizes network traffic and provides a greater network reliability by
controlling the amount of bandwidth an application may use.
IPv4 –
This camera supports the IPv4 internet-layer protocol for packet-switched internetworking
across multiple IP networks. IPv4 uses 32-bit addressing which allows for devices and users on the
internet for routing traffic.
General Remote Focus
1. To control the remote focus via the web interface, double click the camera within the AV IP
Utility (Figure 1) or open your preferred web browser and type the camera’s IP address (Figure
2). NOTE: The following instructions may vary based on the camera model you are using.
NOTE: For supporting H.264 streaming on a webpage, the recommended browsers are Internet
Explorer and Firefox.
Figure 1: Double click via AV IP Utility
Figure 2: Type the camera IP address
2. Scroll to the Focus Tab section.
NOTE: Additional information regarding the Arecont Vision
®
web interface is found separately in the
AV
IP Utility Web Browser Manual
via the Arecont Vision website.
3. Click the Full-range Focus button. The camera begins to autofocus with the lens stopping at the
best overall point of focus. When the focus area turns to Green, the autofocus is complete.
